These are the steps to setup an SSL (Secure Server License) certificate on your website. First, you have to obtain a certificate from a company such as Verisign or Thawte.

Once you have obtained your certificate, follow the steps below to set up SSL on your website.

Generating a self-signed certificate:

You will need to enter the following information:

1) Your 2 letter country code - For example, "AU" (Australia) or "US" (United States).
2) Enter your state code - For example, "NSW" (New South Wales) or "TX" (Texas).
3) Enter the city or locality - For example, "Toronto" or "Austin."
4) Enter the name of the organization - For example, 'The Phoenix Foundation."
5) Enter your organizational unit - For example, "The Engineering Department."
6) Last, you will need to select "Generate self-signed certificate" from the pull down menu at the bottom.
7) Click on "Save Changes" button when finished.

Using a manually entered certificate:

1) Copy the information from the "Certificate Request" window of your self-signed certificate.
2) Open a new browser window and go to the website for one of the certification authorities.
3) Paste the information from step 1 into the site of the certificate authority and follow the instructions on the website.
4) The certificate authority sends you a certificate by email, copy this information.
5) On the SSL Settings section, delete the information currently in the "Certificate" window.
6) Select "Use manually entered certificate " from the drop down menu at the bottom.
7) Click on "Save Changes" button when finished.

Deleting an existing certificate:

1) Select "Delete certificate" from the drop down menu.
2) Click on "Save Changes" button.